Linux version 2.4.10-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Tue Sep 25 12:33:54 GMT 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000def0000 (usable) BIOS-e820: 000000000def0000 - 000000000deff000 (ACPI data) BIOS-e820: 000000000deff000 - 000000000df00000 (ACPI NVS) BIOS-e820: 000000000df00000 - 000000000e000000 (usable) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) On node 0 totalpages: 57344 zone(0): 4096 pages. zone(1): 53248 pages. zone(2): 0 pages. Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Kernel command line: auto BOOT_IMAGE=linux ro root=304 BOOT_FILE=/boot/vmlinuz enableapic vga=0x0314 Initializing CPU#0 Detected 996.325 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 1985.74 BogoMIPS Memory: 222720k/229376k available (1289k kernel code, 6204k reserved, 381k data, 124k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0387fbff 00000000 00000000 00000000 CPU serial number disabled. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU: Intel Pentium III (Coppermine) stepping 0a Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000040 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 996.3206 MHz. ..... host bus clock speed is 132.8427 MHz. cpu: 0, clocks: 1328427, slice: 664213 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfd80e, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent PCI: Using IRQ router VIA [1106/0686] at 00:07.0 got res[10000000:10000fff] for resource 0 of PCI device 1217:6933 got res[10001000:10001fff] for resource 0 of PCI device 1217:6933 PCI: Disabling Via external APIC routing Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14) Starting kswapd VFS: Diskquotas version dquot_6.5.0 initialized vesafb: framebuffer at 0xf0000000, mapped to 0xce800000, size 31680k vesafb: mode is 800x600x16, linelength=1600, pages=32 vesafb: protected mode interface info at c000:7ebd vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for boot splash picture.... found (800x600, 23696 bytes). Initializing splash screen... done. Console: switching to colour frame buffer device 82x26 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled Real Time Clock Driver v1.10e block: 128 slots per queue, batch=16 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686b (rev 42) IDE UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio hda: IBM-DJSA-210, ATA DISK drive hdc: TOSHIBA DVD-ROM SD-C2502, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 19640880 sectors (10056 MB) w/384KiB Cache, CHS=1222/255/63, UDMA(66) hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 ide-floppy driver 0.97.sv Partition check: hda: hda1 hda2 hda3 hda4 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) ide-floppy driver 0.97.sv SCSI subsystem driver Revision: 1.00 request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Uncompressing................................................done. Freeing initrd memory: 463k freed VFS: Mounted root (ext2 filesystem). VFS: Mounted root (ext2 filesystem) readonly. change_root: old root has d_count=2 Trying to unmount old root ... okay Freeing unused kernel memory: 124k freed Adding Swap: 265064k swap-space (priority 42) ip_tables: (c)2000 Netfilter core team ip_conntrack (1792 buckets, 14336 max) Linux Tulip driver version 0.9.15-pre6 (July 2, 2001) PCI: Enabling device 00:11.0 (0011 -> 0013) PCI: Assigned IRQ 11 for device 00:11.0 PCI: Sharing IRQ 11 with 00:04.1 IRQ routing conflict for 00:07.5, have irq 5, want irq 11 IRQ routing conflict for 00:0d.0, have irq 5, want irq 11 eth0: ADMtek Comet rev 17 at 0x1c00, 00:90:96:1C:B8:E3, IRQ 11. usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Enabling device 00:07.2 (0010 -> 0011) PCI: Assigned IRQ 11 for device 00:07.2 PCI: Sharing IRQ 11 with 00:10.0 uhci.c: USB UHCI at I/O 0x1020, IRQ 11 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected uhci.c: :USB Universal Host Controller Interface driver IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver Linux PCMCIA Card Services 3.1.28 kernel build: 2.4.10-4GB #1 Tue Sep 25 12:33:54 GMT 2001 options: [pci] [cardbus] [apm] Intel PCIC probe: <6>PCI: Assigned IRQ 10 for device 00:04.0 PCI: Sharing IRQ 10 with 01:00.0 PCI: Found IRQ 11 for device 00:04.1 IRQ routing conflict for 00:07.5, have irq 5, want irq 11 IRQ routing conflict for 00:0d.0, have irq 5, want irq 11 PCI: Sharing IRQ 11 with 00:11.0 Toshiba ToPIC100 rev 01 PCI-to-CardBus at slot 00:04, mem 0x10000000 host opts [0]: [slot 0xe1] [ccr 0x01] [cdr 0xfe] [rcr 0xc04000] [pci irq 10] [lat 168/176] [bus 2/5] host opts [1]: [slot 0xe1] [ccr 0x01] [cdr 0xfe] [rcr 0xc04000] [pci irq 11] [lat 168/176] [bus 6/9] ISA irqs (default) = 3,4,7,9,12 PCI status changes Switching off penguin. eth0: no IPv6 routers present apm: set display: Unrecognized device ID